Dell PowerVault DR2000v - Manual (Page 9)

ID Issue Workaround
19485 Adding a host name does not work if you use a
FQDN and the host name has letters in it. You can add names as long as the name is made only of
numbers and it is not a FQDN where a period is used in the
name string.
19186 If you change the hostname or the domain
name after setting up the DR Rapid plug-in,
then you may get the wrong backup mode
passthrough or de-dupe. Uninstall and then reinstall the DR Rapid plug-in for this
information to be set correctly.
18848 In the Internet Explorer 9 and 10 browsers,
when you navigate to a DR Series system from
within Global View, and then log out of that
system and return to Global View, you are
logged out of the machine running the Global
View. This issue does not occur with any other supported
browser. For browser information, see the
Dell DR Series
System Interoperability Guide .
18837 Manual modifications made to the Rapid NFS
rdnfs.cfg file are not preserved between plug-
in updates. Manually modify the rdnfs.cfg again after upgrading the
plug-in. This will be corrected in a future release.
18178 The AIO-Stress tool fails when using Rapid
NFS. Rapid NFS, which uses FUSE, does not support AIO.
18501 Rapid NFS performance drops significantly
with parallel NFS ingest from same client. When using Rapid NFS on your client, it is suggested that
you do not run NFS from the same client to the DR Series
system in parallel as this will affect your overall
performance.
18144 A File name too long error is
displayed after trying to create a directory
structure that exceeded 522 directories. The limit on a path within a mount point is 4096 bytes.
18022 Windows 2008 and newer servers cannot
assign local users (other than administrator) to
Access Control Lists (ACLs). Windows 2008
and later does not query the local users on the
DR Series platform. Assign ACLs to the built-in Administrator user on the DR
Series platform if using Windows 2008 and later.
17661 If the cable is removed from a network
interface and the network is restarted, the
interface does not get an IP. If you then
reinsert the cable, you must restart the
network to get an IP. Ensure that the interfaces that you want to add or modify
are connected when making Advanced Networking
changes. To restart the network, type network --
restart at the CLI command line.
17294 An NVBU backup will stop if the DR Series
system goes into maintenance mode as it
moves into a read-only condition when this
occurs. Restart the datacopy operation after the DR Series system
enters the operational mode.
17206 Advanced networking allows you to change
the IP of an interface that is part of a
replication link. Understand your current configuration before adding new
advanced networking configuration so that you do not
impact the current system configuration.
9