Dell PowerEdge 1800 - Manual (Page 11)

Installing the Tower-to-Rack and Rack-to-Tower Kits
9
Figure 1-4. Removing the Right-Side Cover
2 Install the rack-adapter plate:
a Align the 12 securing tabs on the rack-adapter plate with the 12 securing slots on the
chassis. See Figure 1-5.
b Slide the rack-adapter plate toward the front of the system.
c Replace the two back-panel screws to secure the rack-adapter plate to the chassis.
Figure 1-5. Installing the Rack-Adapter Plate
right-side cover
back-panel
screws (2)
securing slots (12)
rack-adapter
plate
back-panel
screws (2)
P2648bk0.book Page 9 Thursday, October 14, 2004 11:18 AM