Removing the system stabilizer feet – Dell PowerEdge 1800 User Manual
Page 9
Advertising
Installing the Tower-to-Rack and Rack-to-Tower Kits
7
5
Pivot the bezel outward until it is at a right angle to the front panel.
6
Remove the bezel from the slots on the front panel.
Figure 1-2.
Removing the Bezel
Removing the System Stabilizer Feet
Remove the screws that secure the system stabilizer feet to the chassis. See Figure 1-3.
keylock
latch
bezel
P2648bk0.book Page 7 Thursday, October 14, 2004 11:18 AM
Advertising