Rack-to-tower kit instructions – Dell PowerEdge 1800 User Manual
Page 13
Advertising
Installing the Tower-to-Rack and Rack-to-Tower Kits
11
Figure 1-7.
Installing the Slide-Shoulder Screws
The system is now ready to be installed into a rack. See the documentation that came with your
rack for more information.
Rack-to-Tower Kit Instructions
NOTE:
For instructions on how to install the tower-to-rack kit, see "Tower-to-Rack Kit Instructions."
This section provides instructions on how to install the rack-to-tower kit. The rack-to-tower kit
includes the items listed below. See Figure 1-8.
•
One system side cover
•
Four stabilizer feet
•
Four stabilizer-foot swivel disks
•
Four stabilizer-foot securing screws
slide-shoulder screws (6)
P2648bk0.book Page 11 Thursday, October 14, 2004 11:18 AM
Advertising