Dell PowerEdge 1800 - Manual (Page 16)

14
Installing the Tower-to-Rack and Rack-to-Tower Kits
www
.dell.com | support.dell.com
Figure 1-11. Removing the Rack-Adapter Plate
2 Install the system side cover:
a Align the 16 securing tabs on the side edges and the front edge of the side cover with the
16 securing slots on the chassis. See Figure 1-12.
b Slide the side cover toward the front of the system.
c Replace the two back-panel screws to secure the side cover to the chassis.
Figure 1-12. Installing the System Side Cover
rack-adapter
plate
back-panel
screws (2)
securing slots (16)
system side
cover
back-panel
screws (2)
P2648bk0.book Page 14 Thursday, October 14, 2004 11:18 AM