Setting up smi-s, To select the data collector service user type, Setting up smi-s on – Dell Compellent Series 40 User Manual
Page 102
94
Enterprise Manager 5.5 Installation and Setup Guide
Setting Up SMI-S
The Dell Compellent SMI-S Provider is set up via the Enterprise Manager Data Collector
Manager properties. SMI-S can be set up during the Data Collector installation or at a later
time. Setting up the Dell Compellent SMI-S provider consists of setting the following Data
Collector Manager properties:
•
On the
General properties tab, select the Service User Type for the Data Collector
Service. The
User Type you select determines the options that are available for
managing Pegasus users. To automatically add and manage a Pegasus user, run the
Data Collector as either a Domain User Account or a Local User Account. To manually
manage Pegasus users, run the Data Collector as a Local Service Account (the default).
•
On the
SMI-S properties tab, enable SMI-S and set SMI-S properties. SMI-S properties
include enabling SLP and/or https services, as well as selecting to manually manage
Pegasus users or not.
To select the Data Collector Service User Type
1 In the Enterprise Manager Data Collector, click Properties.
Note
The Data Collector Properties are automatically displayed during installation. If you
have already installed the Data Collector, right-click the Data Collector icon
in
the system tray. Select
Show.
2 In the left pane of the properties display, click Service.
3 Click Change. Select one of the following Service User Type: