Dell Compellent Series 40 - Manual (Page 55)

47
Updating Data Collector Properties

To change Data Collector user security
Note For details on using Data Collector Enhanced security, see Using Enhanced Security
on page 55 .
1 Double-click on the Data Collector icon .
2 Click Properties. If prompted to do so, log in as an administrator.
3 In the left pane, click User Viewer.
To change user security from Open to Enhanced:
a Click on Change User Security to Enhanced. A warning message appears.
b Click OK to switch to enhanced security. The Data Collector Service is restarted. See
Using Enhanced Security on page 55 for details.
To change user security from Enhanced to Open:
a Click Change User Security to Open. A warning message appears.
b Click OK to switch to open security (that is, no security). The Data Collector Service
is restarted. Security information for users is saved, but not enforced. If you switch
back to enhanced security, all user security settings are enforced. See
Using
Enhanced Security on page 55 for details.