Dell Compellent Series 40 - Manual (Page 36)

28 Enterprise Manager 5.5 Installation and Setup Guide
Disconnecting and Reconnecting a Remote Data Collector

To temporarily disconnect a remote Data Collector
1 On the remote Data Collector server:
a Open the Data Collector Manager.
b Click
to stop the Data Collector Manager service.
2 Log on to the Enterprise Manager client, and display the Remote Data Collector viewer.
The State for the remote Data Collector shows Not Connected the next time the primary
Data Collector attempts to synchronize with the remote Data Collector.

To remove a Remote Data Collector
1 On the remote Data Collector server:
a Open the Data Collector Manager.
b Click
to stop the Data Collector Manager service.
Note If you intend to permanently remove the remote Data Collector, uninstall the Data
Collector using Add/Remove Programs.
2 Log on to the Enterprise Manager client, and display the Remote Data Collector viewer.
3 Click Remove Remote Data Collector.

To reconnect a remote Data Collector
1 On the remote Data Collector server:
a Open the Data Collector Manager.
b Click
to start the Data Collector Manager service.
2 Log on to the Enterprise Manager client, and display Remote Data Collector viewer.
When the remote Data Collector service has established a connection with the primary
Data Collector, the state shows as
Connected.