Dell PowerVault DR6000 User Manual

Page 165

Advertising
background image

There are still other alert and event messages that direct you to contact Dell Support for assistance, where Dell Support
intervention may be required.

Table 1 lists the DR Series System Alert Messages by system alert type: general system, system chassis, NVRAM,

and PERC-specific alert messages that could be displayed during the course of backup and deduplication-related

operations.

Table 2 lists the DR Series System Event Messages by system event type (type 1 through 7): event messages that

could be displayed during the course of backup, replication, deduplication, diagnostics, cleaner, DataCheck,

maintenance, and OpenStorage Technology (OST) operations.

Table 8. DR Series System Alert Messages

Alert Message

Description/Meaning or Action

General System Alerts

Filesystem scan requested.

System is switching to Maintenance mode. Filesystem has
read-only access.

NVRAM not detected.

Ensure that the NVRAM card is seated properly.

NVRAM capacitor is disconnected.

Contact Dell Support for possible support assistance or
intervention.

NVRAM capacitor has degraded.

Contact Dell Support for possible support assistance or
intervention.

NVRAM solid-state drives (SSD) are disconnected.

Contact Dell Support for possible support assistance or
intervention.

NVRAM has failed to backup or restore data during the
last boot.

Contact Dell Support for possible support assistance or
intervention.

NVRAM hardware failure.

Contact Dell Support for possible support assistance or
intervention.

Data volume is not present. Check that all drives are
installed and powered up.

Contact Dell Support for possible support assistance or
intervention.

File server failed to start after multiple attempts.

Contact Dell Support for possible support assistance or
intervention.

File server failed multiple times. Entering Maintenance
mode.

Contact Dell Support for possible support assistance or
intervention.

Insufficient disk space exists.

The filesystem is now read-only.

Unable to detect filesystem type on the Data volume.

Contact Dell Support for possible support assistance or
intervention.

Unable to detect filesystem type on the Namespace
volume.

Contact Dell Support for possible support assistance or
intervention.

Filesystem scan discovered inconsistencies.

Please check the filesystem report, and perform the
suggested action. Contact Dell Support for possible
assistance or intervention.

Replication peer network disconnected.

Check access to remote site.

165

Advertising
This manual is related to the following products: