Dell PowerVault NX3100 - Manual (Page 42)

42
Appendix
Targets Tab
The Targets tab provides the list of individual Targets available to the iSCSI
Initiator. In the following example, three Targets are available to the iSCSI
Initiator.
Figure A-3. Targets Tab in iSCSI Initiator Properties Window
NOTE:
The above illustration is an example of discovery in the Targets tab. In
practice, the Targets are discovered only after you configure the PowerVault NAS
storage system as a Target.
Log On—To gain access to the Target, the Initiator must log on to the Target.
If only one path is available to the Target, only one step is required for log on.
Click Log On..., specify the Target name, and then click OK.