Eject, power, and reset buttons, Eject, power, and reset buttons -5, Figure 6-3 – Dell OptiPlex Gxi User Manual
Page 115: Eject, power, and reset button removal -5, Ject, power, and reset buttons
Advertising
Removing and Replacing Parts on the Mini Tower Chassis
6-5
E
ject, Power, and Reset Buttons
Figure 6-3. Eject, Power, and Reset Button Removal
To remove the eject, power, and reset buttons, follow these steps:
1. Lay the front bezel on a flat work surface, with the back of the bezel
facing up.
2. To remove the 3.5-inch diskette-drive eject button, pull gently on the
plastic part of the button until it comes free.
3. To remove the power button or the reset button, use a small screw-
driver and push in on the two or three plastic clips that hold the button
to the bezel.
When these clips are released, the button comes free from the bezel.
power button
reset button
front bezel
eject button
Advertising