Dell OptiPlex Gxi - Manual (Page 69)

Removing and Replacing Parts on the Low-Profile Chassis 4-5
F
ront-Panel Inserts
Figure 4-3. Front-Panel Insert Removal
To remove a front-panel insert, follow these steps:
1. Lay the computer cover upside down on a flat work surface, with the
front of the cover facing you.
2. From the front of the cover, use your thumbs to push inward on the
insert until it slides off the two posts.
To replace a front-panel insert, position the front-panel insert, then press the
ring-tabs over the posts. If necessary, use a
1/4 -inch nutdriver to help push on
the ring-tabs.
ring-tabs (2)
posts (2)
computer cover
(upside down)
5.25-inch front-
panel insert