Dell PowerEdge 1900 - Manual (Page 55)

Installing System Components
55
3 Remove the fan from the bracket by squeezing the release handles on top of the fan and pulling the
fan out of the bracket. See Figure 3-7.
NOTICE:
Do not remove more than one fan from the system at a time and do not operate the system with any fan
removed for an extended period of time. Overheating can occur resulting in a system shutdown and loss of data.
4 Replace the fan.
5 Rotate the fan bracket toward the shroud and slightly squeeze the side tabs so that the tabs enter the
latch slots.
6 Close the system. See "Closing the System" on page 48.
Figure 3-7. Removing and Replacing the Cooling Shroud Fan
1 fan 2 fan release latches (2) 3 cooling shroud
4 fan bracket latch (2) 5 fan bracket
1
3
2
5
4