Removing the support bracket – Dell Inspiron 530s (Mid 2007) User Manual
Page 106
106
Removing and Installing Parts
4 Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5 Set the cover aside in a secure location.
Removing the Support Bracket
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 103.
2 Remove the computer cover. See "Removing the Computer Cover" on
3 Release the card retention bracket by lifting the card retention release lever up.
4 Remove any cable(s) attached to the support bracket cable clamp.
5 Pivot the support bracket and lift it off the hinge tabs.
6 Set it aside in a secure location.
1
computer cover
1
book.book Page 106 Monday, October 6, 2008 11:38 AM