Ect settings in step 11 – Dell Inspiron 530s (Mid 2007) User Manual

Page 158

Advertising
background image

158

Removing and Installing Parts

8 Replace the computer cover (see "Replacing the Computer Cover" on

page 174).

9 Replace the support bracket (see "Replacing the Support Bracket" on

page 173).

NOTICE:

To connect a network cable, first plug the cable into the network device

and then plug it into the computer.

10 Connect your computer and devices to electrical outlets, and then turn

them on.

11 Enter system setup (see "System Setup" on page 185) and restore the

settings you recorded in Step 1. Then go to the Maintenance section and
clear the low battery and other errors associated with the battery
replacement in the Event Log.

12 Properly dispose of the old battery.

See the

Product Information Guide for battery disposal information.

1

battery release lever

2

battery (positive side)

2

1

book.book Page 158 Monday, October 6, 2008 11:38 AM

Advertising