Dell Inspiron 530s (Mid 2007) - Manual (Page 173)

Removing and Installing Parts
173
8 Connect your computer and devices to an electrical outlet, and turn them on.
9 Verify that the computer works correctly by running the Dell Diagnostics
(see "Dell Diagnostics" on page 88).
Replacing the Support Bracket
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions located in the Product Information Guide.
To replace the support bracket:
1 Align and insert the hinges at the bottom of the support bracket into the
hinge tabs located along the edge of the computer.
2 Pivot the support bracket downward.
3 Align the notch in the support bracket with the slot in the hard drive bay
and press it down.
4 Ensure that the support bracket is seated correctly and replace the card
retention bracket.
book.book Page 173 Monday, October 6, 2008 11:38 AM