System board screws – Dell Inspiron 530s (Mid 2007) User Manual
Page 171
Removing and Installing Parts
171
1 Follow the procedures in "Before You Begin" on page 103.
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove any add-in cards on the system board (see "Cards" on page 128).
4 Remove the processor and heat sink assembly (see "I/O Panel" on
5 Remove the memory modules (see "Removing Memory" on page 127) and
document which memory module is removed from each memory socket so
that the memory modules can be installed in the same location after the
board is replaced.
6 Disconnect all cables from the system board. Note the routing of all cables
as you remove them so that you can re-route them correctly after installing
the new system board.
7 Remove the eight screws from the system board.
8 Lift the system board up and out.
System Board Screws
Inspiron 530s/530sa/530sc
1
screws (8)
2
system board
1
2
book.book Page 171 Monday, October 6, 2008 11:38 AM