Figure 7-7, Attaching the drive bracket to the new drive -7, Figure 7-8 – Dell OptiPlex G1 User Manual
Page 119: Inserting the new drive into the drive bay -7
Advertising
Installing Drives
7-7
)LJXUH$WWDFKLQJWKH'ULYH%UDFNHWWRWKH1HZ'ULYH
To further ensure proper positioning of the drive in the chassis, insert and tighten
all four screws
in the order in which the holes are numbered (the holes are
marked “1” through “4”).
6OLGHWKHQHZGULYHLQWRWKHGULYHED\XQWLOWKHGULYHVQDSVVHFXUHO\
LQWRSODFHVHH)LJXUH
Make sure that both bracket tabs snap into place in the drive bay.
)LJXUH,QVHUWLQJWKH1HZ'ULYH,QWRWKH'ULYH%D\
,I\RXDUHLQVWDOOLQJDGULYHWKDWKDVLWVRZQFRQWUROOHUFDUGLQVWDOOWKH
FRQWUROOHUFDUGLQDQH[SDQVLRQVORW
See “Installing an Expansion Card” in Chapter 6.
&RQQHFWD'&SRZHUFDEOHWRWKHSRZHULQSXWFRQQHFWRURQWKHEDFNRI
WKHGULYHVHH)LJXUH
bracket
bracket tabs (2)
5.25-inch drive
5.25-inch drive
Advertising