Dell Latitude D510 - Manual (Page 15)

5. Lift the display panel, rotating it out of the display cover.
6. Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
7. Press in both sides of the top flex-cable connector, and pull it away from the display connector.
Display Latch
1. Follow the instructions in " Preparing to Work Inside Your Computer ."
2. Remove the keyboard .
3. Remove the display assembly .
4. Remove the display bezel .
1 display panel
2 top cover
3 M2 x 5-mm screws (8)
1 top flex-cable connector
2 display connector
3 bottom flex-cable connector with pull-tab
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's
electronic components. You can do so by touching an unpainted metal surface.