Installing enclosure components, Recommended tools, Front bezel (optional) – Dell PowerVault MD1220 User Manual
Page 27: Removing the front bezel
Advertising
Installing Enclosure Components
27
Installing Enclosure Components
Recommended Tools
You may need the following items to perform the procedures in this section:
•
Key to the system keylock
•
#2 Phillips screwdriver
•
Wrist grounding strap
Front Bezel (Optional)
Removing the Front Bezel
1 Using the system key, unlock the front bezel (if locked).
2 Lift up the release latch next to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system.
book.book Page 27 Monday, December 7, 2009 4:51 PM
Advertising