Dell POWEREDGE C6105 - Manual (Page 11)

11
ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x08 0x02
<Task ID (ex: 0x34)>
Response: Status Code as followed:
0x00: Transmitting Image
0x01: Validating Image
0x02: Programming
0x03: Ready to Accept Image
0x04: USB Unit Stage
0x05: Connecting to server
0x80: General Error
0x81: Cannot establish connection
0x82: Path not found
0x83: Transmission Abort
0x84: Checksum Error
0x85: Incorrect Platform
0x86: Allocate memory failed
0x87: Virtual media detach failed
0xFF: Completed
2 Restart firmware while status code is 0xFF
>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x06
0x02
Update BMC Firmware Through UI
NOTE: Before beginning the firmware update, download the latest firmware
version and save it on your local system. During the process of firmware update, the
AC power of the managed system cannot be unplugged and the Web GUI cannot be
closed.
NOTE: Once you enter into Update Mode and choose to cancel the firmware flash
operation, the BMC must be reset. This means that you must close the Internet
browser and log back onto the BMC card before you can perform any other types of
operations.