Dell POWEREDGE C6105 - Manual (Page 13)

13
Front Panel User Interface
The BMC provides control panel interface functionality including indicators
(fault, status, and ID LEDs) and buttons (power/ID).
Power Button
The power button turns the device on and off.
ID Button
The control panel Chassis Identify button toggles the state of the Chassis ID
LED. If the ID LED is off, pressing the button turns the LED on (blinking).
If the LED is on, pressing the button or an IPMI Chassis Identify command
turns the LED off.
LEDs
BMC Heartbeat LED
The green LED provides an easy way to indicate that BMC is now enabled.
ID LED
A blinking LED indicates the Chassis Identify command has been accepted.
System Status LED
There is a dual-color LED to show the system status. The BMC turns the
LED off after all event logs are cleared.
The behavior of Status LED and ID LED is listed in Table 1-2.
Table 1-3. LED Status
LED Color Status When
Status LED Amber Blinks See "Blinking Health LED
Conditions" on page 14.
Off Normal status
Green On Amber LED is off
Blinks Amber LED is blinking
Off DC off