Dell POWEREDGE C6105 User Manual
Page 49
49
04h
Reset to
Defaults
Request:
Byte 1:
[7:5] -
111b = Restore the remaining
parameters not
included in below lists.
000b = Remaining parameters
stay what it is.
All other values are reserved
[4] - 1b= Restore PEFs to
defaults
[3] - 1b= Restore serial
configuration parameters to
defaults
[2] - 1b= Restore SOL
configuration parameters to
defaults
[1] - 1b= Restore LAN
configuration parameters to
defaults
[0] - 1b= Restore user accounts
to defaults
Response:
Byte 1 - Completion Code
CCh = restore to one or more
of the configuration not
supported.
Byte 2 - Task ID
Use the Task ID to get
the restore status. The
Task ID is automatically
become invalid after 120
seconds when the restore
requesting is completed.
00h reserved.
Table 1-43. OEM Commands Group 1 (Net-Function: 0x30)
(continued)
Net Function = OEM (0x30), LUN = 00
Code
Command
Request, Response Data
Description