Dell POWEREDGE C6105 - Manual (Page 52)

52
SOL Idle Timeout 1 2 byte 1-2 - Define the inactivity timeout in
minutes, 1-based, LSByte first. This
parameter only applies to the IPMI over
LAN session with SOL payload activated.
0h= session does not timeout and close
due to inactivity.
Default = 01h
R/W
Telnet/SSH
Redirect Enable
2 1 0: Disabled (default)
1: Enabled R/W
Configuration ID = 04h, Security
Servoce Disabled 1
1 Disable or enable services. This attribute
takes precedence over the individual
feature enabled/disabled. Once one service
has been disabled, the BMC must not
allow user to enable the corresponding
feature and D5h completion code must be
returned. For example, if HTTP/HTTPS is
disabled, user must not allow to enable the
Web Server through Web Server
Configuration (Configuration ID 0Ch). In
other words, Web can only be disabled or
enabled when HTTP/HTTPS is enabled.
[0] - all service except IPMI are disabled.
This bit takes precedence over other bits.
Default is 0.
[1] - KVM/Virtual Storage, enabled by
default.
[2] - HTTP/HTTPS, enabled by default.
[3] - SSH/Telnet, disabled by default.
R/W
Table 1-44. Extended Configurations
Net Function = OEM (0x30), LUN = 00
All strings are in P-String format.
Attribute ID Size Description