Accessing load paper timeout, Accessing load paper timeout -5 – Dell 7330dn Mono Laser Printer User Manual
Page 133
Printer Settings
Dell 7330 Mono Laser Printer
5-5
Accessing Load Paper Timeout
When your print job is formatted for a type or size of paper that is not loaded in the printer, the
printer’s control panel displays a message requesting you to load the appropriate paper. The
Load Paper Timeout controls the amount of time the printer waits before printing on another
type or size of paper.
To change the load paper timeout, use either:
■
The printer’s control panel
■
Embedded Web Server
Using the Control Panel
To change the load paper timeout:
1.
Select
Printer Setup
, and then press the OK button.
2.
Select
Paper Handling Setup
, and then press the OK button.
3.
Select
Load Paper Timeout
, and then press the OK button.
4.
Scroll to the desired timeout value. The values (
None
,
1
,
3
,
5
, or
10
minutes,
1
hour or
24
hours) indicate the length of time you want the printer to wait for you to load paper
before printing. If you select a value of
None
, the printer does not wait for paper to be
inserted and immediately picks paper from the default tray.
5.
Press the OK button to save the change.
Using the Embedded Web Server
To change the load paper timeout:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s Address field.
3.
Select Properties.
4.
Select the General folder on the left navigation panel.
5.
Select Printer Defaults.
6.
Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,
1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to
wait for you to load paper before printing. If you select a value of None, the printer does
not wait for paper to be inserted and immediately picks paper from the default tray.
7.
Click Save Changes at the bottom of the screen.