Dell 7330dn Mono Laser Printer - Manual (Page 59)

IPv6
Dell 7330 Mono Laser Printer
3-30
Address Precedence
Address precedence can be set to prefer IPv6 or IPv4 addresses when both types are available.
The default setting is to prefer IPv6 addresses. Address Precedence can only be set in the
Embedded Web Server.
Using the Embedded Web Server
To set address precedence using EWS:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field.
3. Click Properties.
4. Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5. Click the TCP/IP (v6) button.
6. In the Address Precedence field, select the desired option.
7. Click the Save Changes button at the bottom of the page.