Dell 7330dn Mono Laser Printer - Manual (Page 82)

Loading Paper
Dell 7330 Mono Laser Printer
4-23
Short-Edge Feed
■ Place Letter, Legal, Statement, Tabloid, A3, A4, A5, US Folio, B4 JIS, and B5 JIS
sizes of paper short-edge feed in Tray 1 (MPT).
■ Place the side to be printed first (page 1) faceup.
■ Place pre-punched paper with the holes toward the front of the printer.
■ Place letterhead (or the top of the page) to enter the printer last.
5. If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select Change setup and then press the OK button.
b. Select the paper type, and then press the OK button.
c. Select the paper size, and then press the OK button to save your selection.
6. In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source.
7330-140