Dell 7330dn Mono Laser Printer User Manual
Page 53
UNIX (Linux)
Dell 7330 Mono Laser Printer
3-24
From Your Computer
To install the printer:
1.
2.
Select Unix from the Operating System drop-down menu, and then click Go.
3.
Click the EWS for Unix package for the operating system this will be installed in. This is
the core package and must be installed first before the printer package.
4.
Click the Start button to begin downloading.
5.
Repeat steps 1 and 2, and then click the Printer Package for use with Services for Unix
Systems link.
6.
Click the Start button to begin downloading.
7.
In your browser, click the Installation Guide link, and then follow the installation
instructions.
Note:
If print-quality problems exist, or your job did not print, access Online Diagnostics
Technical Support through EWS.
To access Online Diagnostics Technical Support:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s Address field.
3.
Select Support.
4.
Click the Online Diagnostics Diagnostic Tool link to access Online Diagnostics.
Installing the Printer When Using CUPS as the Print Spooler
When using CUPS as the print spooler, you need to add the printer’s .ppd file to the
/usr/share/cups/model/Dell directory.
To install the .ppd file:
1.
2.
Select Unix from the Operating System drop-down menu, and then click Go.
3.
Click the PPD Files using CUPS Printing Services link.
4.
Click the Start button to begin downloading.
5.
In your browser, click the README link, and then follow the installation instructions.