Dell 3010cn Color Laser Printer - Manual (Page 50)

Each menu item has a list of values for the menu item. A value can be:
l A phrase or word to describe a setting
l A numerical value that can be changed
l An On or Off setting
l Press at the same time. This recovers the factory default menu settings.
4. Press to scroll until the desired value appears.
5. Press .
This enables the setting value, which is indicated by an asterisk (*) next to the setting value.
6. Press Cancel or to return to the previous menu.
To continue setting other items, select the desired menu. To quit setting new values, press Cancel.
User default menu settings remain in effect until you save new settings or restore the factory defaults. Settings you choose from your software program can
also change or override the user default menu settings you select from the operator panel.
Using the Dell Printer Configuration Web Tool to Change Printer Settings
If your printer is connected to the network, you can change the operator panel settings from your Web browser. If you are a network administrator, you can
clone the printer settings of one printer to one or all printers on the network.
Type your network printer IP address in your Web browser. Choose Printer Settings from the topics list, and then select the printer settings you want to
change.
To copy your printer settings to another printer on the network, choose Copy Printer Settings from the topics list, and then type the other printer's IP
address.
If you do not know your printer IP address, it is specified on the Printer Settings page. To print a Printer Settings page:
1. Press Menu.
2. Press until Configure appears, and then press or .
3. Press until Reports appears, and then press or .
4. Printer Settings is displayed. Press .
The Printer Settings page is printed.
Initializing NVRAM
You can restore the original factory default menu settings by initializing NVRAM.
1. Press Menu.
2. Press until Configure appears, and then press or .
3. Press until Maintenance appears, and then press or .
4. Press until Init NVRAM appears, and then press or .
5. The Init NVRAM Are you sure? message appears on the operator panel. Press .
6. Turn off the printer, and then on again.
Initializing NVRAM from Network settings
You can initialize IP Address by initializing NVRAM from Network settings.
1. Press Menu.
2. Press until Configure appears, and then press or .
NOTE: Settings you choose from your software program may override the settings you select from the operator panel.