Dell 3010cn Color Laser Printer - Manual (Page 82)

Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page.
Ethernet Ethernet
Settings Auto Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T Half-Duplex Selects 10Base-T Half-Duplex as the default value.
10BASE-T Full-Duplex Selects 10Base-T Full-Duplex as the default value.
100BASE-TX Half-
Duplex Selects 100Base-T Half-Duplex as the default value.
100BASE-TX Full-
Duplex Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address Displays the printer's MAC address.
Port
Settings LPD Select the check box to enable the LPD.
Port9100 Select the check box to enable the Port9100.
FTP Select the check box to enable the FTP port.
E-Mail Alert Select the check box to enable the E-Mail Alert feature.
SNMP Agent Select the check box to enable the SNMP.
You can also configure the transport protocol to be used. UDP can be selected as the transport
protocol.
NOTE: The settings in the Port Settings item are valid only when the printer is rebooted. When you change or set this item, click the Restart printer to
apply new settings. button to apply new settings.
TCP/IP
Settings Host Name Specifies the host name up to 15 alphanumeric characters. The default name remains valid if no entry is made.
IP Address
Mode AutoIP Automatically sets the IP address.
DHCP Uses DHCP to set the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
Manually
Set Enables the IP address set in IP Address.
IP Address Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a
value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.
Subnet Mask Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and
255. Note that 255.255.255.255 is invalid.
Gateway Address Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0
and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.