Menu. the user name cannot be changed. see, Set password, Other features – Dell 3010cn Color Laser Printer User Manual
Page 85: Reset print server
Procedures:
1.
Click the first column of Access List row 1.
2.
Enter "192.168.100.10" in the Address field and "255.255.255.255" in the Address Mask field.
3.
Select Reject.
4.
Click the first column of Access List row 2.
5.
Enter "0.0.0.0" in the Address field and "0.0.0.0" in the Address Mask field.
6.
Select Permit.
7.
Click Apply New Settings.
l
Enabling and Disabling Printing from Network Addresses
You can enable printing from the "192.168" network address and disable printing from the "192.168.200" network address. However, the example below
describes how to enable printing from the "192.168.200.10" IP address.
Procedures:
1.
Click the first column of the Access List row 1.
2.
Enter "192.168.200.10" in the Address field and "255.255.255.255" in the Address Mask field.
3.
Select Permit.
4.
Click the first column of the Access List row 2.
5.
Enter "192.168.200.0" in the Address field and "255.255.255.0" in the Address Mask field.
6.
Select Reject.
7.
Click the first column of the Access List row 3.
8.
Enter "192.168.0.0" in the Address field and "255.255.0.0" in the Address Mask field.
9.
Select Permit.
10.
Click Apply New Settings.
Other Features
The Other Features tab includes Set Password page and Reset Print Server page.
Set Password
Purpose:
To set or change the password that is required to access the printer setup parameters from the Dell Printer Configuration Web Tool.
Set the password of the operator panel from Security Settings in the Printer Settings.
This page can also be displayed by clicking Set Password in the Left Frame.
Values:
Reset Print Server
Administrator Password
Sets the password up to 8 alphanumeric characters. The password appears as asterisks (*) in the field when it is
entered.
Confirm Administrator
Password