Loading an envelope in the mpf, Envelope #10, monarch, or dl – Dell C3760dn Color Laser Printer User Manual
Page 241
Loading Print Media
239
Loading an Envelope in the MPF
Use the following guidelines when loading envelopes in the MPF:
CAUTION:
Never use envelopes with windows, coated linings, or self-stick adhesives. These lead to paper jams and can
cause damage to the printer.
NOTE:
If you do not load envelopes in the MPF right after they have been removed from the packaging, they may bulge. To avoid
jams, press firmly across the whole envelopes to flatten them as shown below before loading the envelopes in the MPF.
NOTE:
The maximum height (quantity) of envelopes that can be loaded in the MPF is approximately 15 mm (0.59 inches) (15
envelopes).
Envelope #10, Monarch, or DL
Load the envelopes short edge feed with the flaps closed and the print side up. Ensure that the flaps come at the left
when you face towards the printer.