Dell C3760dn Color Laser Printer - Manual (Page 383)

Troubleshooting Guide 381
Light-induced fatigue
3 Adjust the transfer bias.
a On the operator panel, press the (Menu) button and select
Admin Settings → Maintenance→ Adjust Transfer
Belt Unit.
b Select K Offset or YMC Offset , and then decrease the value.
c Launch the Tool Box, and click Chart Print on the Diagnosis tab.
d Click Ghost Configuration Chart.
The Ghost Configuration Chart is printed.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No
1 Check the light fatigue pattern using the Pitch Configuration Chart.
a Launch the Tool Box, and click Chart Print on the Diagnosis tab.
b Click Pitch Configuration Chart.
The Pitch Configuration Chart is printed.
Does the pattern on the output match with that on the Pitch
Configuration Chart?
Go to action 2. Contact Dell.
2 Replace the drum cartridges. See "Replacing the Drum Cartridges."
Does this solve your problem? The task is complete. Contact Dell.
Action Yes No