Dell C3760dn Color Laser Printer - Manual (Page 288)

286 Using Digital Certificates
5 Click Certificate Management to display the Certificate Management page.
NOTE: The Certificate Management button is displayed only when the optional hard disk is installed and is set to On for
encryption.
6 Select the category from the Category list.
7 Select the purpose of use from the Certificate Purpose list.
Click Display the List to display the Certificate List page.
NOTE: If the list includes more than 20 certificates, click Next to display the next page.
8 Select the certificate to be exported.
9 Click Certificate Details to display the Certificate Details page.
10 To export the selected certificate, click Export This Certificate.
Setting the Features
You can set various security features using digital certificates.
See the following for details:
• "Setting the Certificate in the IPsec Digital Signature Mode"
• "Setting the SSL-use Server Certificate (HTTP/IPP)"
• "Setting LDAP-SSL/TLS Communication"
• "Setting Server Certificate Verification for LDAP-SSL/TLS Communication"
• "Setting Client Certificate for LDAP-SSL/TLS Communication"
• "Setting for Wireless LAN WPA-Enterprise (EAP-TLS)"
• "Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)"
• "Setting Client Certificate for IEEE 802.1x (EAP-TLS)"
Setting the Certificate in the IPsec Digital Signature Mode
NOTE: To manage digital certificates, you must first set encryption of the optional hard disk to On, and then set up HTTPS
communication. For details, see "Preparing to Manage Certificates."
1 Import the certificate to be used with IPsec. For more information, see "Importing a Digital Certificate."
2 Set the certificate to be used with IPsec. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly in IPsec. For more information, see "Confirming the Settings of a
Digital Certificate."
4 Select Print Server Settings from the left side of the page.
5 Click the Security tab.
6 Select IPsec.
7 Select the Enable check box for Protocol.
8 Select Digital Signature from the IKE list.
9 Set each item, as necessary.
10 Click Apply New Settings.
11 After restarting the printer, IPsec communication using digital signatures is enabled. You can execute IPsec
communication (Digital Signature Mode) between the printer and the network device (such as PC) on which the
certificate and IPsec are set identically as on this device.