Dell C3760dn Color Laser Printer - Manual (Page 277)

Printing Using ColorTrack (External Authentication) 275
Authentication System
Specify the server authentication type, the server response time-out, or the search time-out.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a Open the web browser.
b Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool. "
2 Select Print Server Settings.
3 Click the Security tab.
4 Select Authentication System.
Authentication System page is displayed.
• Select the authentication system for
Authentication System Settings.
• Specify the time-out period for Server Response Time-Out.
• Specify the time-out period for Search Time-Out.
5 Click Apply New settings.
6 Turn off the printer, and turn it on again to apply the settings.
Authentication System Settings
Select the authentication system from the list. The change becomes effective after the printer is turned off and then
on again.
Server Response Time-Out
Specify the amount of time the printer should wait for response from the server. Set the time period from 1 up to 75
seconds. The change becomes effective after the printer is turned off and then on again.
Search Time-Out
Specify the amount of time the printer should wait for searching for the server. Set the time period from 5 up to 120
seconds. The change becomes effective after the printer is turned off and then on again.
Kerberos Server
Specify the settings for the Kerberos Server.
When Using the Dell Printer Configuration Web Tool
1 Launch Dell Printer Configuration Web Tool.
a Open the web browser.
b Enter the IP address of your printer in the web browser.
See "Dell™ Printer Configuration Web Tool. "
2 Select Print Server Settings.
3 Click the Security tab.
4 Select Kerberos Server.