Modem, Removing the modem – Dell Inspiron 9300 User Manual
Page 12
Back to Contents Page
Modem
Dell™ Inspiron™ 9300 Service Manual
Removing the Modem
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Turn the computer over, loosen the two captive screws on the modem cover, and remove the cover from the computer.
3.
Remove the M2 x 3-mm screw that attaches the modem to the system board.
4.
Pull up on the pull-tab to disconnect the modem from the connector on the system board.
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must
remove the main battery
before you begin working inside the computer.
NOTICE:
1 modem
2 modem cable
3 pull-tab
4 M2 x 3-mm screw