Dell Inspiron 9300 - Manual (Page 28)

1. Follow the instructions in " Before Working Inside Your Computer ."
2. Remove the display .
3. Remove the display bezel .
4. Slide the latch to the right and gently lift.
5. Remove the spring that attaches the latch to the display panel.
Replacing the Display Latch
1. Replace the spring that attaches the latch to the display panel.
2. Align the latch with the display panel and slide the latch to the left to secure it into place.
Back to Contents Page
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 spring
2 display latch