Dell Inspiron 9300 - Manual (Page 50)

Back to Contents Page
PC Card Cage
Dell™ Inspiron™ 9300 Service Manual
1. Follow the instructions in " Before Working Inside Your Computer ."
2. Remove the hard drive .
3. Remove the optical drive .
4. Remove the hinge cover .
5. Remove the keyboard .
6. Remove the display assembly .
7. Remove the palm rest .
8. Disconnect the PC Card connector from the system board.
9. Remove the four M2 x 3-mm screws that attach the PC Card cage to the top of the hard drive bay.
Back to Contents Page
CAUTION: Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1 PC Card connector
2 M2 x 3-mm screws (4)