Speakers, Removing the speakers, Replacing the speakers – Dell Inspiron 9300 User Manual
Page 34
Back to Contents Page
Speakers
Dell™ Inspiron™ 9300 Service Manual
Removing the Speakers
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Remove the
hinge cover
.
3.
Remove the
keyboard
.
4.
Remove the
display assembly
.
5.
Remove the
palm rest
.
6.
Disconnect the speaker connector from the system board.
7.
Lift the tape securing the speaker cables to the computer base, and disengage the cables from the cable guides.
8.
Remove the four M2.5 x 5-mm screws from the speakers (two on each speaker).
9.
Remove the speakers.
Replacing the Speakers
1.
Connect the speaker connector to the system board connector.
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must
remove the main battery
before you begin working inside the computer.
NOTICE:
Handle the speakers with care to avoid damaging them.
1 M2.5 x 5-mm screws (4)
2 cable guides
3 tape
4 speakers (2)
5 speaker connector on the system board