Battery latch assembly, Removing the battery latch assembly – Dell Inspiron 9300 User Manual
Page 55
Back to Contents Page
Battery Latch Assembly
Dell™ Inspiron™ 9300 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
Removing the Battery Latch Assembly
1.
Follow the instructions in "
Before Working Inside Your Computer
."
2.
Remove the
hinge cover
.
3.
Remove the
keyboard
.
4.
Remove the
display assembly
.
5.
Remove the
palm rest
.
6.
Remove the
system board
.
7.
Remove the hard drive bay by removing the four M2 x 3-mm screws, and lifting out the bay.
8.
Remove the screw in the battery latch assembly.
When you remove the screw, the battery latch release on the bottom of the computer will also be removed.
CAUTION:
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To avoid damaging the system board, you must
remove the main battery
before you begin working inside the computer.
1 hard drive bay
2 M2 x 3-mm screws (4)