Dell PowerEdge 2500SC User Manual
Page 5
Advertising
6. Repeat step 1.
7. Install the jumper plug on the PASSWD jumper.
8. Replace the right-side computer cover, and then reconnect the computer and peripherals to their electrical outlets and turn them on.
9. Assign a new system and/or setup password.
To assign a new system password using the System Setup program, see "Assigning a System Password" in the User's Guide.
Back to Contents Page
NOTE:
If you assign a new system and/or setup password with the jumper plug still removed, the system disables the new password(s) the next time it
boots.
Advertising