Dell PowerEdge RAID Controller S100 - Manual (Page 16)

16 Overview
• Microsoft Windows Server 2008 Web Edition (x64)
• Microsoft Windows Server 2008 Web Edition (x86)
• Microsoft Windows Small Business Server 2008
• Microsoft Windows Small Business Server 2008 SP2
• Microsoft Windows Small Business Server 2003 R2 SP2 (x86 or x64)
• Microsoft Windows Small Business Server 2011
• Microsoft Windows Web Server 2008 R2
• Microsoft Windows Web Server 2008 R2 SP1
• Microsoft Windows Server 2003 SP2 (x86 or x64)
• Microsoft Windows
Server 2003 R2 SP2, 32-bit or 64-bit, Standard and
Enterprise Edition
• Microsoft Windows Server 2003 R2 SP2 32-bit Web Edition
• Microsoft Windows Server 2008 SP2, 32-bit or 64-bit, Standard and
Enterprise Edition
NOTE: Microsoft Windows Server 2003 SP1 is not supported.
NOTE: Microsoft Windows Server 2003 R2 is not supported.
NOTE: PERC S100 controllers and PERC S300 controller are not supported
with Windows Hyper-V.
Supported
devices
• PERC S100 adapter: supports Dell-supported SATA-based tape devices
and SATA optical disk devices.
NOTE: The PERC S100 controller supports system boot to a tape using a
Dell RD1000 tape device. Select Continue while in CTRL-R for RD1000 to
remain first in the boot order. The RD1000 option goes to end of the boot
order listing if <Ctrl><Alt><Del> is selected and you would not be able to
boot to it.
• PERC S300 adapter: does not support tape devices or SATA optical disk
devices.
Table 2-2. Platform Requirements — PERC S100 Controller or PERC S300 Controller
Component Requirements
A5_bk0.book Page 16 Thursday, February 10, 2011 8:34 PM