Dell Inspiron 3000 - Manual (Page 105)

Removing and Replacing Parts 4-69
13.3-Inch LCD Bracket
Figure 4-49. 13.3-Inch LCD Bracket Removal
To remove the 13.3-inch LCD bracket, follow these steps:
1. Remove the front bezel.
See “13.3-Inch LCD Front Bezel” found earlier in this section.
2. Remove the LCD panel.
See “13.3-Inch LCD Panel” found earlier in this section.
3. Remove the hinges.
See the previous subsection, “13.3-inch LCD Hinges.”
4. Remove the bracket from the back cover.
Remove EPE foam (taped in place). Remove bracket screws BR1, BR2, and
BR3. Remove the bracket using two plastic wedges.
Be careful not to break the plastic case of the back cover or mar the EMI fin-
ish on the inside of the cover.
back cover
bracket
EPE foam
BR2
BR3
(screws BR1–BR3
are 5 mm)
5 mm
BR1
LCD cable harness