Dell Inspiron 3000 - Manual (Page 43)

Removing and Replacing Parts 4-7
Figure 4-7. Hard-Disk Drive Removal
8. Remove the memory module cover.
After the hard-disk drive is removed, lift the memory module cover off the
computer. Slide the cover out slightly and lift it up and away from the com-
puter (see Figure 4-7).
When reinstalling the cover, place it over the memory module opening,
leaving about
1/4 -inch gap, then slide the cover into place.
9. Remove the memory modules.
Carefully spread apart the inner metal tabs of the memory module socket to
disengage the module from the socket (the module should pop up slightly).
Then lift the memory module away from the socket (see Figure 4-8).
Figure 4-8. Removing a Memory Module
CAUTION: When the hard-disk drive is removed, the memory mod-
ule cover is not secured. Use caution to avoid damage to the memory
modules or the cover.
(screws HD1 and
HD2 are 3 mm)
3 mm
memory module
cover
hard-disk
drive cover
bottom of computer
HD1
HD2
memory module
bottom of computer