Dell Inspiron 3000 - Manual (Page 95)

Removing and Replacing Parts 4-59
12.1-Inch LCD Panel
.
Figure 4-41. 12.1-Inch LCD Panel Removal
To remove the 12.1-inch LCD panel, follow these steps:
1. Remove the front bezel.
See the previous subsection, “12.1-Inch LCD Front Bezel.”
2. Remove LCD panel screws LC1, LC2, LC3, and LC4.
3. Remove the LCD Panel.
NOTE: Be careful when removing any part of the LCD flex cable.
Lift up the LCD panel, and disconnect the LCD-to-inverter cable from con-
nector CN1 at the top of the inverter board. Disconnect the LCD flex cable
from the flex-cable connector, J1, in the middle left side on the back of the
panel.
LCD panel
LC1
(screws LC1–LC4
are 5 mm)
LCD flex cable
inverter board
LC2
LC3
LC4
5 mm
flex-cable
connector
LCD-to-
inverter
cable
connector
CN1
back cover