Operating the monitor, Using the front panel buttons, On screen menu/display (osd) – Dell E1609WFP Monitor User Manual
Page 13
Back to Contents Page
Operating the Monitor
Dell™ E1609W Flat Panel Monitor User's Guide
Setting the Optimal Resolution
Using the Front Panel Buttons
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,
an OSD shows their numeric values as they change.
The following table describes the front panel buttons:
On Screen Menu/Display (OSD)
A
MENU
Use the Menu button
to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and to exit the OSD. See
B
Brightness/Contrast
Hot Key
Use this button for direct access to the '
' and '
C
Auto Adjust
Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-adjusts to the current
input:
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment', you can further tune your
monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.
NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables.
D
Power Button &
Indicator
Use this button to turn your monitor on or off.
A green power light indicates that the monitor is on and functional.An amber power light indicates that the monitor is in power save mode.