Dell E1609WFP Monitor - Manual (Page 5)

Activate the computer and monitor to gain access to the OSD .
Pin Assignments
15-pin D-Sub connector
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using
Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select
different settings if required.
Switch off - - - Off Less than 1 W
NOTE: The OSD functions only in the normal operation mode. Otherwise one of the following messages will appear depending upon the selected input.
NOTE: Dell E1609W Flat Panel monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.
Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Number Monitor Side of the 15-pin Side Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9 DDC +5V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock
Flat Panel Specifications
Model number Dell E1609W Flat Panel Monitor
Screen type Active matrix - TFT LCD
Screen dimensions
15.6 inches
(15.6-inch wide viewable image size)
Preset display area:
l Horizontal 347.5mm (13.7 inches)