Dell E1609WFP Monitor - Manual (Page 23)

Back to Contents Page
Setting Up the Monitor
Dell™ E1609W Flat Panel Monitor User's Guide
Attaching the Base
Connecting Your Monitor
Removing the Stand Base
Removing_the_Stand_for_VESA_wall_mount
Attaching the Base
Connecting Your Monitor
Connecting Your Monitor Using a VGA Cable
NOTE: The base is detached when the monitor is shipped from the factory.
To attach the base of the stand to the monitor stand:
1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the back until it clicks into place.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions .
1. Turn off your computer and disconnect the power cable.