Dell E1609WFP Monitor - Manual (Page 24)

Removing the Stand Base
Removing the Stand for VESA wall mount
Back to Contents Page
2. Connect the blue VGA cable to the blue connector on the computer and monitor.
3. Connect the power cable.
To remove the base of the stand from the monitor:
1. Place the monitor panel on soft cloth or cushion on a stable flat table.
2. Press and hold the release latch, while pulling the base of the stand away from the monitor.
To remove the stand assembly from the monitor:
1. Place the monitor panel on soft cloth or cushion on stable flat table.
2. Use a screwdriver to remove the three screws on the stand of the monitor as
the below pictures shows.
3. Remove the stand assembly from monitor.