Dell POWEREDGE M905 - Manual (Page 286)

264 System Management Commands
www
.dell.com | support.dell.com
show stack-port diag
NOTE: This command is intended only for Field Application Engineers (FAE) and developers.
An FAE will advise when to run this command and capture this information.
Use the show stack-port diag command in Privileged EXEC mode to display front panel stacking
diagnostics for each port.
Syntax
show stack-port diag
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the front panel stacking diagnostics.
console#show stack-port diag
1/xg1:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
console#show stack-port diag
1/xg2:
RBYT:0 RPKT:0 TBYT:e38b50 TPKT:d1ba
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
Legend:
RBYT : Received Bytes
RPKT : Received Packets
TBYT : Transmitted Bytes
TPKT : Transmitted Packets